Donnerstag, 29. Oktober 2026

Workbench update

Hello,

Since there’s nothing major to report or any finished projects to show, here’s a quick snapshot from my workbench.


I’ve started painting a small series of self-cast Prince August Prussian figures, representing the 21st Musketeer Regiment (von Hülsen). Painting the exact same pose over and over is both a blessing and a curse. Looking at the collections of others who collect these types of figures, I’ve determined that I need about 16 figures per battalion—not for wargaming, but simply to make them look like a proper military unit. It’s going to be quite a while before anything is actually finished!

In the foreground, you can see the next batch of figures, waiting to have their mold lines removed and to be glued together.

Additionally, I’ve begun cleaning up and priming some 1/32-scale flat figures from Toy Soldier LAD. I picked one of the Germanic warriors as a test subject—only to immediately prove that I’m not very good at painting flat figures! I initially tried to blend highlights and shadows right from the start, but it didn’t turn out very well. So, I’m hitting the reset button and trying again, this time using base colors followed by a few washes.

What you can’t see in the photo: on the shelf above me, there’s a whole collection of 1/30-scale resin figures waiting to be painted. To my left, there are several 1/100-scale FDM-printed vehicles that still need their support structures removed. On top of that, countless historical paper figures are waiting to be restored (that’s the focus of my other blog).

Best regards,

Andreas

Montag, 26. Oktober 2026

The Joy of Pewter Casting!

Hello,

Just a few days ago, I thought of tin casting as nothing more than a necessary evil—a means to get figures to paint.

That has changed quite a bit. After my first attempt—which left me with plenty of heads but very few usable bodies (because of miscast bayonets & sabres)—I cautiously started cutting air vents into the rubber molds. Ever since then, I can hardly wait to get back to casting! My success rate improved significantly right away. I’m also starting to get a feel for the right temperatures, and, more importantly, learning which clamps to use—and how many—to hold the molds together effectively.

I find myself analyzing the results after every single cast, wondering if I could improve things further by adding another air vent or drilling an extra hole somewhere...

For the last two evenings, I had intended to spend a few minutes painting after work—but somehow, I ended up back in the workshop, casting figures and tinkering with the molds instead. It seems that tin casting is—for me, at least—highly addictive.

Fearing that I might run out of casting material, I turned the whole house upside down—and discovered the remnants of my childhood tin soldiers. It’s a treasure trove of scrap metal that can be melted down and reused. It works perfectly for casting new figures—nearly as well as the "Model Metal" from Prince August.


Here is a selection of the figures I’ve cast so far:

Now, however, I need to show some discipline and actually paint a few of these figures—even though I’d ​​much rather order new molds for the Seven Years' War. And, of course, I still need to try out the 54mm Prince August figures! And the "Zinnbrigade" molds from Schildkröt can still be found on eBay... 😁

It’s all no problem; I have things under control—and I can stop at any time. I think... 😂😂😂

Best regards,

Andreas

Sonntag, 25. Oktober 2026

Mail from Kazakhstan!

Hello,

Yesterday, the doorbell suddenly rang, and a friendly postal worker was there, asking me to pay customs duties on a small package...

For some time now, I’ve been keeping an eye on the figures from "Toy Soldiers LAD." They produce 1/32-scale plastic "flat" figures (two-dimensional, silhouette-style figures), following a tradition common in the Eastern Bloc countries. While such flat figures became quite rare in the West after World War II—found mostly among collectors of tin figures—they were apparently quite standard toys in the Eastern Bloc.

A few weeks ago, I decided to try my hand at painting some of these flat figures myself, so I ordered a few sets. It took three weeks for these little warriors to arrive. I think the figures are very well made. There are still some traces of mold-release agent on some of them, but once cleaned in soapy water using an old toothbrush, they should be perfect for painting.

Here is an initial look at the figures:

Germanic Warriors


Soldiers of Peter the Great (circa 1700)


German Soldiers, 1941


Soviet Soldiers, 1941


Best regards,

Andreas

Donnerstag, 22. Oktober 2026

Prince August Casting set arrived!

Hello,

Christmas is very early this year! My Prince August pewter casting kit was delivered yesterday evening. I'm excited when I'll find the time to try it out.


Best regards,

Andreas

Dienstag, 20. Oktober 2026

1/100 (15mm) More modern US vehicles

Hello,

Here are a few more US vehicles that I finally put together. 

Here too, nothing was painted but everything was printed in multi-color FDM. The models all come from Jason Miller from various Kickstarters.

In terms of time, these models were all created before the last vehicles shown. These were basically my test objects to get the printer working. The HMMWV's were my first attempt at digitally painting 3D models with a camouflage scheme - which is incredibly time consuming! 

These are all the modern US vehicles I have printed so far. At some point I'll do a lot more Abrams and Bradleys, but until then I'll focus on other nations.

Shown are: HMMWV, HMMWV FragKit, M1097 AN/TWQ-1 Avenger, M113A3

Best regards,

Andreas

Montag, 19. Oktober 2026

Prince August Prussians - First test figures painted

Hello,

I finally got around to painting two Prince August sample figures.

I wanted to achieve an "old-school" toy soldier look—the figures needed to be high-gloss and really brightly colored.

First, I had to figure out how to hide the base plates, some of which weren't fully cast. I used a 3D printer to create a sort of "overshoe" for the bases, and then simply filled the gaps with acrylic paste. This simple technique ensures all the bases look uniform, and it also improves the figures' stability, helping to prevent the so-called "domino effect."

When painting, I initially tried adding some shading and highlights, but I didn't really like the result. To boost the contrast between the colors and make it easier for the eye to pick out details on the glossy surfaces, I ended up outlining some areas in black.

I took photos of the paints I used so I’ll be able to remember them next time.


Originally, I used acrylic paint pens from "Artecho" for the metallic colors; they looked great and were very easy to apply. But then came a surprise when I applied the gloss varnish—it reactivated the ink from the pens! As a result, I had to repaint parts of the figures...

Learning by doing!

Although painting these two figures took much longer than I had anticipated, it was still a lot of fun. Because of this, I’ve ordered a beginner’s casting kit along with a few molds from Prince August; I’m really looking forward to casting some tin soldiers again after all these years.

Best regards,

Andreas

Mittwoch, 14. Oktober 2026

40mm Prince August tin figures

 Hello,

A few days ago, I stumbled upon a Facebook group dedicated to self-cast pewter figures made using Prince August molds. It immediately brought back memories of casting and painting pewter figures myself as a child (with my father)—I think they were from Nürnberger Meisterzinn and Zinnbrigade, and perhaps even a few Prince August ones?

However, before diving headfirst into this new adventure, I wanted to hold a few of these figures in my hand and paint them. Prince August now offers a 40mm series tailored to wargamers, covering the Seven Years' War—and those are exactly the kind of new figures I wanted. Unfortunately, you can't buy them anywhere as pre-cast figures; only the molds are available, meaning you have to cast the figures yourself. Since I couldn't find any figures on eBay or elsewhere, I asked in that Facebook group, and a very kind member from France sent me a few castings right away.

After a few days of waiting, they arrived today!

The first step will be to straighten them out, remove mold lines, and attach the heads. After that, they’ll be primed—and I’m planning to make 3D-printed "over-bases" to fit over the cast fgures bases. This will allow me to hide any casting flaws and ensure they are all perfectly rectangular—which might come in handy for unit trays later on.

I’m going for a "toy soldier" painting style, with little to no highlighting or shading. Plus, the soldiers need to have a glossy finish! I’m just not sure yet how I’ll handle the details... Maybe add a few hints of shading? Or go for high contrast and some sort of "blacklining" using black paint or ink? Hopefully, I’ll know more in a few days! 😁

Best regards,

Andreas

Montag, 5. Oktober 2026

1/100 (15mm) Cold War USSR vehicles

Hello, 

here are a few more multi-color FDM prints. This time, they are vehicles for a Soviet motorized rifle battalion from the 1980s. In the long run, I aim to field the battalion's vehicles (plus the division's supporting tank company) at full strength! However, this won't happen all at once; instead, I’ll print a few vehicles here and there.



The files all come from Thingiverse. The T-72B, BTR-60PB, and UAZ-469 are by m_bergman. The GAZ-66 is by Pfelpensson and was scaled from 1:285 to 1:100.

Best regards, Andreas

Donnerstag, 1. Oktober 2026

1/100 (15mm) Modern US vehicles

 Hello,

Here are a few photos of 1/100 scale modern US Army vehicles. 

The STL files are by Jason Miller. I printed the models using matte PLA from "Jayo" in "oak" and "black" on my Snapmaker U1. 

The U1 is a four-color FDM printer; the vehicles in the photos have simply had the support material removed and were glued together where necessary. Even though the models are only two-tone, it makes a surprisingly big difference compared to single-color prints! In the future, I won't be painting my FDM vehicles at all; instead, I'll just apply a few decals where needed and seal them with a matte varnish.




Best regards,

Andreas

The photos show: 4x M1 A2 Abrams, 2x JLTV, 2x RG31 Mk.5, 2x M923 A2

Doric Columns

Something completely different for a change! An acquaintance on Facebook is building a very impressive Greek harbor complex in 1/72 scale. I...