Hello,
Just a few days ago, I thought of tin casting as nothing more than a necessary evil—a means to get figures to paint.
That has changed quite a bit. After my first attempt—which left me with plenty of heads but very few usable bodies (because of miscast bayonets & sabres)—I cautiously started cutting air vents into the rubber molds. Ever since then, I can hardly wait to get back to casting! My success rate improved significantly right away. I’m also starting to get a feel for the right temperatures, and, more importantly, learning which clamps to use—and how many—to hold the molds together effectively.
I find myself analyzing the results after every single cast, wondering if I could improve things further by adding another air vent or drilling an extra hole somewhere...
For the last two evenings, I had intended to spend a few minutes painting after work—but somehow, I ended up back in the workshop, casting figures and tinkering with the molds instead. It seems that tin casting is—for me, at least—highly addictive.
Fearing that I might run out of casting material, I turned the whole house upside down—and discovered the remnants of my childhood tin soldiers. It’s a treasure trove of scrap metal that can be melted down and reused. It works perfectly for casting new figures—nearly as well as the "Model Metal" from Prince August.
Here is a selection of the figures I’ve cast so far:
Now, however, I need to show some discipline and actually paint a few of these figures—even though I’d much rather order new molds for the Seven Years' War. And, of course, I still need to try out the 54mm Prince August figures! And the "Zinnbrigade" molds from Schildkröt can still be found on eBay... 😁
It’s all no problem; I have things under control—and I can stop at any time. I think... 😂😂😂
Best regards,
Andreas


Keine Kommentare:
Kommentar veröffentlichen